Lubrication; Greasing The Machine - Toro Sand Pro 3040 Operator's Manual

Lubrication

The machine has grease fittings that must be lubricated
regularly with number 2 general-purpose lithium grease after
every 100 hours of operation.
Lubricate the following bearings and bushings:
•
Front wheel bearing (1)
Figure 22
•
Traction-pedal pivot (1)
Figure 23
•
Rear hitch (5) (Figure
Figure 24
(Figure 22)
(Figure 23)
24)
•
Steering cylinder rod end (1) (Model 08705 only)
25)
•
Steering pivot (Figure
Note: The flush fitting on the steering pivot
requires a grease gun nozzle adapter. Order Toro Part
No. 107–1998 from your Authorized Toro Distributor.

Greasing the Machine

Service Interval: Every 100 hours
1. Wipe the grease fitting clean so that foreign matter
cannot be forced into the bearing or bushing.
2. Pump grease into the bearing or bushing.
3. Wipe up excess grease.
25
Figure 25
26)
(Figure
Figure 26
(Figure
26)