Panasonic KX-TDA30 Installation Manual page 231

Error Code Error Message
200 LPR start up error
(ROM NG)
201* LPR start up error
(RAM NG)
202* LPR start up error
(No Program)
203* LPR start up error
(Version NG)
204* LPR start up error
(Download NG)
205* LPR start up error
(No response)
206 LPR start up error
(Card type NG)
207 LPR start up error
(Check SUM NG)
230* Card
disconnected
231 LPR alive check
error
232 MPR-LPR
communication
error
233 LPR data check
error
234 DPLL clock failure
235* CS clock failure
PROBABLE CAUSE
• Optional service card
malfunction: DHLC,
DLC, CSIF, T1, E1,
BRI, PRI, OPB3, CTI-
LINK, E&M, IP-GW,
DID, SLC8
• Optional service card
malfunction: DHLC,
DLC, CSIF, T1, E1,
BRI, PRI, OPB3, CTI-
LINK, E&M, IP-GW,
DID, SLC8
• Optional service card
not installed properly
• Optional service card
malfunction
• Back board
malfunction
• Optional service card
malfunction: DHLC,
DLC, CSIF, T1, E1,
BRI, PRI, OPB3, CTI-
LINK, E&M, IP-GW,
DID, SLC8
• Back board
malfunction
• MPR card malfunction
• Optional service card
malfunction: CSIF
4.1 Troubleshooting — KX-TDA100/KX-TDA200
SOLUTION
• Pull out and re-insert the
corresponding optional service card
• Press the Reset Button
• Replace the corresponding optional
service card
• Pull out and re-insert the
corresponding optional service card
• Press the Reset Button
• Update the software of the
corresponding optional service card
• Replace the corresponding optional
service card
• See if the corresponding optional
service card is installed properly
• Pull out and re-insert the
corresponding optional service card
• Press the Reset Button
• Replace the corresponding optional
service card
• Replace the back board (be sure to
turn off the Hybrid IP-PBX when
replacing)
• See if the corresponding optional
service card is installed properly
• Pull out and re-insert the
corresponding optional service card
• Press the Reset Button
• Replace the corresponding optional
service card
• Replace the back board (be sure to
turn off the Hybrid IP-PBX when
replacing)
• Replace the MPR card (be sure to turn
off the Hybrid IP-PBX when replacing)
• Replace the corresponding optional
service card
Installation Manual 231