Panasonic KX-TDA30 Installation Manual page 366

6.8 Connection of 2.4 GHz Portable Stations — KX-TDA30
Using the KX-TD7690
Select
"SYSTEM LOCK".
SEL
S1
ENTR
S1
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong Hybrid IP-PBX, a PIN for PS registration can be set
to the Hybrid IP-PBX. Before registering the PS to the Hybrid IP-PBX, register the PIN set to
the Hybrid IP-PBX into the PS. By doing so, the PS will only be registered to the Hybrid IP-PBX
with the matching PIN.
Notes
• By default, the PIN for PS registration is "1234" for both the Hybrid IP-PBX and PS.
Therefore, the PS can be registered to the Hybrid IP-PBX without setting the PIN.
• The PIN for PS registration will only be used when registering the PS to the Hybrid
IP-PBX. Therefore, even when there is more than 1 Hybrid IP-PBX with the same PIN
near the PS, the PS will not be linked to a different Hybrid IP-PBX during normal
operation after registration.
Setting the PIN for Hybrid IP-PBX
[692]
Setting the PIN for PS
Using the KX-TD7680
Select
"CHANGE PIN"
Using the KX-TD7690
Select
"CHANGE PIN"
366 Installation Manual
SEL CHNG
S1 S1
System Lock Password
ENABLE
4 digits
DISABLE
C.Tone
PIN for PS Registration
ENTER
PIN for PS Registration
SEL
PIN for PS Registration
S1
Choose
"Enable/Disable".
ENTR
S1
1 to 4 digits
1234
1 to 4 digits
1234
ENTR
1 to 4 digits
1234
System Lock Password
4 digits
END
ENTER
C.Tone
C.Tone
S1