Receiving Water From The Water Dispenser; Cleaning The Interior And The Exterior Of The Unit; Cleaning The Water Tank And Water Dispenser - Kenwood K4D496X18 Installation Instructions Manual

receiving water from the water dispenser

You should use the type of container that can fit under
the water dispenser. Place the container properly
underneath and push on the lever for water to flow.

cleaning the interior and the exterior of the unit

• Remove all the shelves and drawers.
• Wipe the inside of the unit with a weak solution of bicarbonate soda and then rinse with warm
water using a sponge or cloth. Wipe completely dry before replacing the shelves and drawers.
• Use a damp cloth to clean the exterior, and then wipe with a standard furniture polish. Make sure
that the doors are closed to avoid the polish getting on the magnetic door seal or inside the unit.
• The grille of the condenser at the back of the unit and the adjacent components can be
vacuumed using a soft brush attachment.

cleaning the water tank and water dispenser

• To clean the water tank, see the section "before using the water dispenser".
• To clean the water dispenser, wipe it with damp towel regularly.
13