Software And Firmware Upgrades; Viewing Software Revision; Upgrading The Software - GE Druck DPI 620 Genii User Manual

User Manual
1.13

Software and Firmware Upgrades

1.13.1

Viewing Software Revision

The software revisions running on the DPI620 Genii can be
viewed by selecting:
DASHBOARD >>
Note: If the software revision number is highlighted red then
an upgrade is available.
1.13.2

Upgrading the Software

Follow the website instructions to download the files onto
a USB flash memory drive.
www.ge-mcs.com
1. Select:
DASHBOARD >>
2. Enter the calibration PIN: 5487
3. Select the
4. Select:
UPGRADE
5. Continue with one of these operations:
06 June 2013
STATUS >> SOFTWARE BUILD
ADVANCED
button.
K0541 issue 1
Druck DPI620 Genii
Page 23 of 175