Menus Overview - ABB SM500F Commissioning Instructions

5

Menus overview

Process group 1
(recording channels 1.1 to 1.6)
Fig. 12 Overview of operator displays
IMPORTANT (NOTE) Only process groups and views
that are enabled are displayed.
Operator menus
Press from any operator or log view to display the Operator
menus. Recorder functions are then accessed by using the
and keys to highlight the required option within the
displayed menu and pressing
option.
12
Process group 2
(recording channels 2.1 to 2.6)
to select the highlighted
Configuration level menus
To access the configuration menus:
1. Highlight Configuration in the operator menu.
2. Press and highlight the operator to log on as.
3. Press and enter the operator password (if configured).
IMPORTANT (NOTE) If the recorder is being used
for the first time, a password is not set.
4. Select the configuration entry mode:
a. Edit Current Configuration
b. Open a Configuration
c. New Configuration
CI/SM500F–EN Rev. A