Advanced Videographic Recorder
SM2000
4.2 Overview of Configuration – Fig. 4.3
1
Select the Common Configuration icon in the main configuration window (see
Fig. 4.3 Overview of Configuration Steps
Note.
1. The icons available in the main configuration window depend on the number of Process Groups that are currently enabled.
2. It is also possible to exit Configuration screens by pressing the
48
below).
Note 1
Close the Configuration Window and Save
7
or Cancel the changes (see
Repeat steps 1 to 5 for the remaining icons
6
in the Configuration Window
Select the next tab (in this case 'Screen') and repeat steps 2 and 3 .
4
Close the current configuration window
5
(in this case 'Common Configuration')
(see
Note 2
Edit the first parameter on the first Tab
2
(in this case the 'Configuration Type' in the 'Set Up' tab.
3
Repeat for each parameter, as required
key.
4 CONFIGURATION
below)
Note 2
below)
IM/SM2000
Issue 11