Users - ABB SM2000 User Manual

Advanced Videographic Recorder
SM2000

4.4.5 Users

Note.
User 1 is the System Administrator and is able to change user names/access privileges and enter initial passwords for all
other users. Other users cannot change their user names and access privileges once set by User 1. All users may change
their own passwords.
The following parameters are displayed only if 'Security system' is set to 'Basic' – see Section 4.4.4, page 56.
58
Set the user name(s) and associated password(s) to be used to
access the Configuration level when 'Configuration security' is
set to 'Password protected' – see below.
Enter a name for the selected user.
Enter an initial password for the selected user.
Set access privileges for the selected user.
Enabled – The selected user is able to access the
Configuration level.
Disabled – The selected user is unable to access the
Configuration level.
Note. When the method of access to the Configuration level is
set to 'Password protected' (see Section 4.4.4, page 56) and a
user with Configuration level access privileges changes the
instrument's configuration, the 'Name' of the user is included in
the audit log entry.
4 CONFIGURATION
IM/SM2000 Issue 11