Advanced Videographic Recorder
SM2000
4.9 Functions
Fig. 4.17 Functions Configuration
4.9.1 Custom Linearizers
98
Functions
Press the
key adjacent to the linearizer to be adjusted to
open the Adjust custom linearizer' window.
Use the
and
modified.
Press the
key adjacent to the X% point or the Y% point to
open the digipad to change the position of that point.
Press
to close the digipad and return to the 'Adjust
custom linearizer' window.
Press
to close the 'Adjust custom linearizer' window.
Each linearizer has 20 breakpoints. Both X and Y values are set
as percentages.
Custom linearizers can be applied to any analog input by
selecting them as the linearizer type for that input – see
Section 4.6.2, page 80.
Note.
x is I/P to linearizer expressed as a percentage of electrical
range.
y is expressed as a percentage of engineering range.
4 CONFIGURATION
keys to highlight the point to be
IM/SM2000
Issue 11