Functions; Custom Linearizers - ABB SM1000 User Manual

Videographic Recorder
SM1000

4.7 Functions

Fig. 4.17 Functions Configuration

4.7.1 Custom Linearizers

IM/SM1000 Issue 11
Use the and keys to highlight the linearizer to be
adjusted.
Press the key to open the 'Adjust custom linearizer' screen.
Use the , , and
be modified.
Press the key to open the digipad to change the position of
that point.
Press the key to return to the Functions screen.
Each linearizer has 20 breakpoints. Both X and Y values are set
as percentages.
Custom linearizers can be applied to any analog input by
selecting them as the linearizer type for that input – see
Section 4.6.2, page 74.
Note.
X is input to the linearizer expressed as a percentage of the
electrical range.
Y is output expressed as a percentage of the engineering range.
4 Configuration
keys to highlight the point to
87