ABB SM1000 User Manual page 71

Videographic Recorder
SM1000
IM/SM1000 Issue 11
Set to 'On' to enable the operator to display the Digital Indicator
view.
Note. This parameter is displayed only if the Totalizer option is
enabled.
Set to 'On' to add the channel totalizer value and units to the
indicator displays (if the totalizer for that channel is enabled –
see Section 4.6.5, page 84).
Select the menu items to be accessible from the Digital Indicator
view.
Message select enable
Enables the Operator to activate one of 24 pre-configured
messages or a user-defined message.
Alarm acknowledge enable
Enables the Operator to acknowledge any alarms associated
with the current group.
Totalizer reset enable
Enables the Operator to reset the totalizer value to the preset
totalizer value on any or all channels.
Totalizer stop/go enable
Enables the Operator to start and stop the totalizer.
Channel select enable
Enables the Operator to display or hide individual channels.
Note.
Menu items that are not enabled are greyed-out in the
Digital Indicator View menu.
Totalizer menu items can be enabled only if the Totalizer
option is enabled.
4 Configuration
69