Archiving; Card Compatibility; Media Status - ABB SM1000 User Manual

Videographic Recorder
SM1000

3.5 Archiving

Recorded data, logs and configuration files stored on the instrument's internal memory can be archived to files created on removable
media. Parameters for archiving Process Groups 1 and 2 data are set up independently.
Note. To configure Archiving, refer to Section 4.5.6.

3.5.1 Card Compatibility

Our recorders comply with approved industry standards for memory cards. SanDisk Standard Grade memory cards have been fully
tested and are recommended for use with our recorders. Other brands may not be fully compatible with this device and therefore may
not function correctly.
3.5.2 Media Status – Fig. 3.3
Fig. 3.3 Media Status Icons
Note. Do not remove media while either of the media update in progress status icons (
34
External archive media not inserted (yellow flashing exclamation mark)
External archive media on-line (green icon, shaded area indicates % used)
External archive media off-line (grey icon, shaded area indicates % used)
External archive media update in progress (see
External media 100% full, archiving stopped (green/red icon, flashing white cross)
Warning! Too many files (green icon – media online, grey icon – media offline)
Too many files, archiving stopped (red icon, flashing yellow cross)
Amount of memory used on the external archive media currently installed
Approximate time left before the current external archive media is full,
assuming the amount of data recorded remains the same.
Time Left Display Format
>=1 Day: Days, e.g. '5 Days'
>=1 Hour, <1 Day: Hours, e.g. '10 hours'
<1 Hour: Minutes, e.g. '25 minutes'
below)
Note
or ) are displayed.
IM/SM1000 Issue 11
3 Setup