ABB SM1000 User Manual page 15

Videographic Recorder
SM1000
IM/SM1000 Issue 11
Select a channel scale to be displayed in the scale bar at the top of the chart window.
For digital channels, the On and Off tags are displayed at the corresponding position on
the scale bar.
Select 'Auto Scroll' to display the scale for each enabled channel in turn for 36 seconds.
Hide individual channel traces to improve chart clarity.
Traces are identified by the Channel Number (e.g. Ch1.1) and its short tag.
Note. The recording of a channel's data is not affected by this operation and the
instantaneous channel values are still shown on the indicators at the top of the screen.
To acknowledge a particular alarm, use the
and press the key.
Note. Active unacknowledged alarms in the current process group are identified by a
flashing red Alarm Event icon in the bottom left hand corner of the associated channel
indicator. Active acknowledged alarms are identified by a continuous red Alarm Event
icon in the bottom left hand corner of the indicator – see Fig. 2.3, page 7.
To acknowledge all active alarms in the current process group simultaneously, select 'All'
and press the key.
Note. If an alarm in
the other
continues to be displayed in the status bar. If an active alarm in
is unacknowledged, the icon is surrounded by a red flashing border (
If neither alarm on a particular channel is configured, the short channel tag is shown
greyed-out in the menu.
Select 'AutoView Scroll' to display the chart for each configured process group in turn for
40 seconds. The AutoView Scroll status icon (
AutoView Scroll is active. Press any key to cancel AutoView Scroll.
and keys to highlight it in the menu
process group is active, the Global Alarm status icon (
) is displayed in the status bar when
2 Operation
)
process group
the other
).
13