Setup; Introduction; Accessing The Setup Level - ABB SM1000 User Manual

Videographic Recorder
SM1000

3 Setup

3.1 Introduction

Note. Users with Setup access can:
Start/Stop recording.
Switch between primary and secondary recording rates.
Set archiving 'on-line' and 'off-line'.
View internal and external archive media file directories and delete external archive media files.
3.2 Accessing the Setup Level – Figs. 3.2 and 3.3
Access to the Setup Level is controlled by the instrument's Security System – see Section 4.4.7, page 60.
If 'Security System' is set to 'Basic' and 'Setup Level Security' is set to 'Off', access to the Setup Level is unrestricted.
If 'Security System' is set to 'Basic' and 'Setup Level Security' is set to 'On', access to the Setup Level is protected by a single
password for all users. Refer to Fig. 3.2 to access the Setup Level.
If 'Security System' is set to 'Advanced' and 'Setup Level Security' is set to 'On', access to the Setup Level is protected by a
unique password for each authorized user. Refer to Fig. 3.3 to access the Setup Level.
Setup Security
Not Enabled
Fig. 3.1 Accessing the Setup Level – Basic Security
IM/SM1000 Issue 11
Note. The Setup level can be
accessed from any operator screen.
Setup
Security
Enabled
3 Setup
Invalid Setup
Password
Valid Setup
Password
29