ABB SM1000 User Manual page 21

Videographic Recorder
SM1000
IM/SM1000 Issue 11
Stop and start individual totalizers.
Channel totalizers that have not been enabled in the Configuration level are greyed-out.
Note.
Displayed only if the Totalizer option is enabled.
When a totalizer is not running (i.e. 'Stop' is selected), the corresponding totalizer
value is shown in red.
Reset the totalizer value to the totalizer preset value.
Channel totalizers that have not been enabled in the Configuration level are greyed-out.
Note. Displayed only if the Totalizer option is enabled.
To acknowledge a particular alarm, use the
and press the key.
Note. Active unacknowledged alarms in the current process group are identified by a
flashing red Alarm Event icon in the bottom left hand corner of the associated indicator.
Active acknowledged alarms are identified by a continuous red Alarm Event icon in the
bottom left hand corner of the indicator – see Fig. 2.6, page 17.
To acknowledge all active alarms in the current process group simultaneously, select 'All'
and press the key.
Note. If an alarm in
the other
continues to be displayed in the status bar. If an active alarm in
is unacknowledged, the icon is surrounded by a red flashing border (
If neither alarm on a particular channel is configured, the short channel tag is shown
greyed-out in the menu.
Select 'AutoView Scroll' to display the digital indicator for each configured process group
in turn for 40 seconds. The AutoView Scroll status icon (
when AutoView Scroll is active. Press any key to cancel AutoView Scroll.
and keys to highlight it in the menu
process group is active, the Global Alarm status icon (
2 Operation
process group
the other
).
) is displayed in the status bar
19
)