ABB SM1000 User Manual page 66

Videographic Recorder
SM1000
64
Select Horizontal --> (Chart runs left to right with scale bar on
left), Horizontal <--(chart runs right to left with scale bar on right),
or Vertical chart view.
Select the annotations to be displayed on the chart. Alarm
events and operator messages are displayed on the chart
adjacent to the point at which the alarm occurred – see
Section 2.3, page 7.
This initial setting can be changed by the operator if 'Chart
annotation select enable' is enabled in the Chart view menu
enables – see 'Menu Enables' on page 65.
Select the number of major and minor chart divisions to be
displayed on the chart and its scale bar.
Select the number of major vertical divisions to be displayed.
Select the number of minor vertical divisions to appear between
the major chart divisions.
4 Configuration
IM/SM1000 Issue 11