ABB SM1000 User Manual page 48

Videographic Recorder
SM1000
Configuration Level Unprotected
(see Section 4.1.1, page 45)
Check this box to
stop recording
while in the
configuration
mode
Use and
to highlight a
different selection.
Use to
accept the
selection.
The existing security configuration parameters are
retained (i.e. the security configuration remains as
currently configured) when a configuration is opened
from file or when a new configuration is loaded.
Check 'Load security configuration from file' to
overwrite the current security configuration with
data from the file to be loaded – see
Fig. 4.1 Accessing the Configuration Level
Note.
1. If 'New Configuration' or 'Open a Configuration' is selected and the modified configuration file is saved later as the current
configuration, new internal data files for all enabled recording channels are created and any unarchived data is lost.
2. The option to load or retain the security configuration applies only to Advanced Security mode and is available only to the
System Administrator (User 1). If a new or existing configuration file is opened by a user other than the System
Administrator, the instrument's existing security settings are retained.
46
Configuration Level Protected
(see Section 4.1.1, page 45)
Cancel and return to
the operator level
Press to toggle between
internal and external
storage.
below.
Note 2
Displayed only if 'Security
system' parameter is set to
'Basic' – see
Section 4.4.4, page 56
Edit the current configuration. Changes are not implemented
until saved on exit from the Configuration level
Open a configuration saved previously to internal or external
storage (up to 16 configurations can be stored in internal
memory) – see below. Alternatively, open one of the
Note 1
QuickStart templates – see Appendix D, page 119.
Press to cancel.
Open a new configuration with
the default settings detailed in
Appendix D, page 119 – see
Note
below
1
Invalid Password
Displayed only if 'Security
system' parameter is set to
'Advanced' – see
Section 4.4.4, page 56
Valid Password
Press to accept
the selection.
IM/SM1000 Issue 11
4 Configuration
Entered
Entered