Basic Setup - ABB SM500F Commissioning Instructions

Field-mountable paperless recorder

Hide thumbs Also See for SM500F:

User manual (190 pages)

Door assembly replacement (6 pages)

Manual (4 pages)

Table Of Contents

Table of Contents

Enlarged version

Basic setup

Perform the following steps in sequence to set up the recorder

for the first time. For detailed configuration instructions refer to

the User guide – IM/SM500F-EN.

Start up

1. Locate and mount the recorder as described in Sections 1

and 2.

2. Make electrical and signal connections as described in

Section 3.

3. Power up the recorder.

4. Proceed to the next step to set the date and time.

Set the date and time

1. Press the

key from any operator or log view to display

the operator menu.

2. Use the

keys to select Operator 1 and press the

key.

3. Use the

keys to select the 'OK' button at the

Operator 1 – Password (0...9999) page and press the

key (passwords are not set at first-time use). The Operator

1 Edit / Open / New Configuration dialog is displayed with

the Edit Current Configuration button (

4. Press the

key to display the system configuration

screen.

5. Press the

key to display the configuration menu, use the

keys to highlight the Common menu option and

press

to display the common configuration page.

6. Use the

key to select the Time tab and press the

to edit the Date and Time field. The following warning is

displayed:

press the

key.

7. Use the

and

edit.

8. Enter the required information in each field pressing

before using the

next field.

9. When all fields have been set, use the

keys to highlight

and press

10. Proceed to the next step to set the sample rate.

CI/SM500F–EN Rev. A

) highlighted.

keys to select the first field to

and

keys to move to the

and

to return to the Time tab.

Configure the process group(s)

1. Press the

key to display the configuration menu, use the

keys to select Group 1 and press the

display the group's Recording tab.

2. Use the

to each field and press the

parameter as required.

3. Use the

key to select the Chart tab.

4. Use the

to each field and press the

parameter as required.

5. If Indicator View is required, use the

Indicator tab.

6. Use the

to each field and press the

parameter as required.

7. Use the

key to select the Archive tab.

8. Use the

to each field and press the

parameter as required.

9. Repeat steps 1 to 8 for Group 2 recording parameters (if

required).

Configure the recording channels

1. Press the

key to display the configuration menu, use the

keys to select Channels 1.1 - 1.6, press the

and use the

configure and press the

Setup tab.

key

2. Use the

to each field and press the

parameter as required.

3. Use the

key to select the Analog I/P XX tab.

4. Use the

to each field and press the

parameter as required.

5. Repeat steps 3 and 4 for each of the Alarm and Totalizer (if

enabled) tabs as required.

6. Press the

key to display the configuration menu, use the

keys to select Channels 1.1 - 1.6, press the

and use the

configure and press the

Setup tab.

7. Repeat steps 2 to 5 to configure the channel as required.

8. Repeat steps 6 and 7 for each of the remaining channels as

required.

9. Repeat steps 1 to 8 for Channels 2.1 - 2.6 (if required).