Brother MD-602 Service Manual page 52

Display No. SW
ON (Not used)
81
OFF Normally OFF
ON (Not used)
82
OFF Normally OFF
Presser foot rise by treadle is always active.
ON
* Only when SW1-1 is set to OFF
83
Presser foot rise by treadle is not active after use of knee switch (presser lifter switch).
OFF
* Only when SW1-1 is set to OFF
Inching speed < Thread trimming speed
ON * Inching speed can be set to slower than thread trimming speed to facilitate 1 stitch
84
Inching speed ≥ Thread trimming speed
OFF
Speed of end tacking = Speed of start tacklng
ON
85
* Setting speed of end tacking to same as start tacking
OFF Speed of end tacking = Speed of end tacking
ON Servo lock timer OFF operation disabled
86
OFF Servo lock timer OFF operation enabled
Brake force increases with presser UP/DOWN signal
ON
* When memory switch [88] is set to ON
87
Brake force does not increase with presser UP/DOWN signal
OFF
* When memory switch [88] is set to ON
ON Servo lock enabled
88
OFF Servo lock disabled
ON (Not used)
91
OFF Normally OFF
ON (Not used)
92
OFF Normally OFF
Treadle operation valid after standing work (during simultaneous operation, standing work
ON
93
has priority)
OFF Treadle operation invalid after standing work
ON (Not used)
94
OFF Normally OFF
ON (Not used)
95
OFF Normally OFF
ON (Not used)
96
OFF Normally OFF
ON (Not used)
97
OFF Normally OFF
ON (Not used)
98
OFF Normally OFF
46
sewing.
Item & Contents
MD-602, 612