Basic Performance - Panasonic CM602-L Reference Manual

1.3.2 Basic Performance

Item
High-speed head (12 nozzles)
Placement angle 0 ° to 359 ° (It can be set in increments of 0.01°.)
Placement range See "1.4.1 Applicable Board Specifications."
PCB flow direction See "1.3.3 Board Flow Direction."
Placement tact
∗
1
time
(For 0603, 0.058 s)
(Under optimum
conditions)
Placement
∗ 1 ∗ 2
0603/1005 placement ± 0.05 mm:
accuracy
(Under optimum
conditions)
Component dimensions
0603 chip to 5 mm × 5 mm
Target (7.3 mm or less diagonally)
component
Component thickness
6.5 mm maximum
0.9 s (Board size: L 240 mm × W 240 mm or under)
Board
1.8 s (Board size: L 240 mm × W 240 mm to L 330 mm × W 330 mm)
changing time
2.3 s (Board size: L 330 mm × W 330 mm to L 510 mm × W 460 mm)
∗ 1 : The values may vary with the type of component.
∗ 2 : It is the case where the placement angle is 0 ° , 90 ° , 180 ° , or 270 ° . The values vary in the case of
the other angles. They may be affected by rapid changes in ambient temperature.
EJM4A-E-RMA01-A01-01
0.038 s per chip
Cpk ≥ 1
CM602-L
Reference Manual
Description
High-speed head (8 nozzles)
0.048 s per chip
(For 0603, 0.065 s)
0603/1005 placement ± 0.05 mm:
Cpk ≥ 1
Component dimensions
0603 chip to 24 mm × 24 mm
Component thickness
6.5 mm maximum
1.3 Equipment Specifications
Multi-functional head
0.16 s per chip
(For QFP, 0.18 s)
QFP placement ± 0.035 mm:
Cpk ≥ 1
Component dimensions
0603 chip to 100 mm × 90 mm
Component thickness
21 mm maximum
Mass
30 g maximum
Page 1-13