Product Configuration; Basic Composition - Panasonic LP-RF Series Setup & Maintenance Manual

1-2 Product Configuration

1-2-1 Basic composition

This product is a laser marker designed to mark and process the object by radiating a laser beam to the target.
The laser marker LP-RF series consists of the following units mainly.
q
No. Name
Head
q
Controller
w
Unit power cable (Attached accessory)
e
Signal cable (Attached accessory)
Fiber cable
AC power cable (Optional item)
r
USB cable (Attached accessory)
t
Commercially available PC
y
(Not included in this product.)
Laser Marker Smart Utility software
u
(Attached CD-ROM)
e
t
y
Description
It is the unit that radiates the laser beam. The optical parts and the
scanner are loaded inside.
It is the unit that generates the marking data. The laser oscillator,
the main power supply and connection interface with external
devices are loaded.
Cables to connect the head and controller.
The fiber cable delivers the laser beam from controller to head.
Cable to supply AC power to the controller. Purchase the specified
optional cable or a cable with the enough rating capacity to fulfil the
power voltage specification of this product, which is compliant with
the standards in the country or region where it is used.
Cable to connect the laser marker with a PC.
Install the attached software "Laser Marker Smart Utility" onto a PC
and set the marking data of the laser marker. You can use this PC
as a monitor during the operation.
This software contains the laser marker configuration software
"Laser Marker NAVI smart" and PDF manual data.
ME-LPRF-SM-11
w
u
r
19