Panasonic LP-RF Series Setup & Maintenance Manual page 151

„ Position correction - Marking - Image checking (when TIMING IN signal is used)
TRIGGER IN (X5)
TIMING IN (No.24)
READY OUT (Y5)
TIMING WAIT OUT (No.36)
CHECK OK OUT (No.34)
or
CHECK NG OUT (No.35)
PROCESSING OUT (Y10)
LASING OUT (No.40)
SCRIPTING OUT (No.37)
PROCESSING END OUT (Y11)
*1: CHECK OK OUT (No.34) / CHECK NG OUT (No.35) outputs is output before PROCESSING OUT (Y10) is turned OFF.
Item Time
T1 2ms or more
T2 ―
T3 ―
T4 Max. 60 sec.
T5 ―
T6 ―
T7 ―
T8 2 to 510 ms
ON
T1
OFF
Starting location
ON
detection signal
OFF
ON
OFF
ON
T2 T4
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Remarks
Keep the ON status for 2ms or more.
Processing time of linkage operations with the image checker.
In this case, it is the following time.
• Time for location detection by image checker
• Time for marking position correction by the laser marker
When TRIGGER IN (X5) is accepted, PROCESSING OUT (Y10) turns ON.
The output time of PROCESSING OUT includes the trigger delay time, operation time,
laser radiation time and laser marker internal processing time of the linkage devices.
Turn on TIMING IN within 60 seconds after TIMING WAIT OUT is turned ON.
If there is no input of TIMING IN within 60 seconds, an error occurs and trigger processing
is terminated due to the abnormality.
Laser radiation time. The time varies depending on marking contents.
Processing time of communication and linkage operations with the image checker.
For code checking or character checking, time for transferring the marking data to the
image checker by the laser marker is included.
Processing time of linkage operations with the image checker.
In this case, it is the following time.
• Time for reading by the image checker
• Time for transferring the checkup results from the image checker to the laser marker
One-shot output. Set the output time on the system settings screen.
There is a small margin of error for the setting value.
ME-LPRF-SM-11
T1
Starting marking signal
T6 T4
T3
T5
T1
Starting image checking signal
T7
T8
*1
T8
151