10.
Insert the side panel straight. The projecting part of upper and bottom of the side panel should be fit the drain of the
controller. Slide the panel to the front of the controller and tighten the screws (M3 screws, four positions) of the back of
the controller.
Tightening torque: 0.5 N·m
• Be careful not to let the inside cables get caught while installing.
11.
If you replaced the contactor, reset the operating data in
Laser Marker NAVI smart.
Go to the "Maintenance" screen and select "Operating data".
For "Number of switching cycles of INTERLOCK contactors",
select "Reset" and confirm with "Yes" to reset the value.
ME-LPRF-SM-11
179