Panasonic LP-RF Series Setup & Maintenance Manual page 39

„ Example of head installation base
Example dimensions of plate for the head are indicated below.
For plate thickness of 10 mm
Unit: mm
20
No. Description
Head fixing hole (6 holes): φ6.6 through hole
q
You can change the position of the fixing holes depending on the intended screw holes to use.
Head positioning pin (2 pins): φ4 SUS pin, height 4
w
• As the laser pointer radiate the beam toward the center of the marking field, it is recommended to process the laser
emission port and laser pointer emission port hole to link them so that the laser pointer's beam path does not interfere
with the plate.
80 80
62.2
q
104
ME-LPRF-SM-11
10 4 60
On the laser marker side
60
w
39