Panasonic LP-RF Series Setup & Maintenance Manual page 22

□ Air filters for □ Connector covers
replacement
2 filters for upper side,
2 filters for bottom
*1: Attach one ferrite core to the LAN cable (Ethernet), one to the I/O lines from the I/O terminal, and one to the I/O lines
from the I/O connector.
*2: This CD-ROM contains the following data:
PC configuration software
Laser Marker NAVI smart
Logo Data Editing Software
ExportVec
Font Maker
PDF manuals
Laser Safety Guide
Setup/Maintenance Guide
Serial Communication Command Guide
Serial Communication Command Guide: LP-400/V
compatible mode
Laser Marker NAVI smart Operation Manual
Logo Data Editing Software Operation Manual
ExportVec Operation Manual
Font Maker Operation Manual
Font files (.FON)
Fonts for alphanumeric characters and symbols: ORG1, ORG2, ORG3, ORG4, ORG5, ORG1S,
ORG2S, ORG3S, OCR1, ORG3-L1, DINLIKE1-L1
Fonts for Japanese characters: JIS1 (JIS level 1), JIS2 (JIS level 2)
Fonts for Simplified Chinese characters: GB2312-1 (GB 2312 level 1), GB2312-2 (GB 2312 level 2)
User-defined font: USER1
2D code pattern font: 2DCODE
*3: Attached to the head with shipment. Remove this cap before operation. Do not screw the lens when removing the cap.
• The AC power cable is not included in this product. Purchase the specified optional cable or a cable with the enough
rating capacity to fulfil the power voltage specification of this product, which is compliant with the standards in the
country or region where it is used. For the optional cables, refer to "1-4-4 Cables" (P.28).
22
□ Scanner unit cover
of unit power cable
and signal cable (for
head)
1 set for each cable
□ M5 screw (for
scanner unit cover)
qty.: 1
Language
English / Simplified Chinese / Japanese
ME-LPRF-SM-11
□ Protection cap of
laser emission port
*3
qty.: 4 qty.: 1