Panasonic LP-RF Series Setup & Maintenance Manual page 182

7.
Establish an online connection between your PC and the laser marking system. Go to the "System settings" screen
and select "Operation/Information" tab. Select "Change" next to the "System clock" to set the date and time.
8.
Select "Apply to laser marking system" on the left side of the ribbon.
• An alarm for system clock stop may be generated when the laser marker is started for the first time since the battery
replacement. To release the alarm, reset the date and time and click the confirmation button in the error dialog.
182
ME-LPRF-SM-11
"Apply to laser marking
system" tool