Communication processor and Modbus TCP
12.6 Telecontrol and TeleService with the CP 1242-7
Short name
ANT794-3M
The antennas must be ordered separately.
Further information
You will find detailed information in the device manual. You will find this on the Internet on
the pages of Siemens Industrial Automation Customer Support under the following entry ID:
23119005 (http://support.automation.siemens.com/WW/view/en/23119005)
12.6.5
Configuration examples for telecontrol
Below, you will find several configuration examples for stations with a CP 1242-7.
Sending messages by SMS
Figure 12-3
A SIMATIC S7-1200 with a CP 1242-7 can send messages by SMS to a mobile phone or a
configured S7-1200 station.
770
Order no.
6NH9 870-1AA00
Sending messages by SMS from an S7-1200 station
Explanation
Flat antenna (900, 1800/1900 MHz); weatherproof
for indoor and outdoor areas; 1.2 m connecting cable
connected permanently to the antenna; SMA
connector, including adhesive pad, screws mounting
possible
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG