NEC Express5800/T110i System Configuration Manual
NEC Express5800/T110i System Configuration Manual

NEC Express5800/T110i System Configuration Manual

Hide thumbs Also See for Express5800/T110i:

Advertisement

NEC Express5800/T110i
System Configuration Guide
Introduction
This document contains product and configuration information that will enable you to configure your system. The guide will
ensure fast and proper configuration of your NEC Express5800 server.
June 25, 2018
Revision 7.0
NEC Corporation

Advertisement

Table of Contents
loading

Summary of Contents for NEC Express5800/T110i

  • Page 1 NEC Express5800/T110i System Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper configuration of your NEC Express5800 server. June 25, 2018 Revision 7.0 NEC Corporation...
  • Page 2: Table Of Contents

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Contents TECHNICAL SPECIFICATION ..................3 Specification ............................3 EXTERNAL VIEWS ......................6 Front View .............................. 6 Rear Views ............................. 7 Dimensions (mm) ..........................8 CONFIGURATION DIAGRAM ..................10 Expansion Slots ..........................10 SERVER CONFIGURATION ..................11 Base Models ..........................
  • Page 3: Technical Specification

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Technical Specification Specification (1 / 2) Model T110i Part Number N8100-2707F, N8100-2534F Intel® Core™ Processor Type Intel® Intel® Intel® Xeon® Celeron® Pentium® i3-7300 processor processor processor processor E3-1220 v6 G3930 G4560 Clock speed 2.90 GHz 3.50 GHz...
  • Page 4 Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors. Noise emission was measured in accordance with ISO 7779, at 25°C. The actual value may vary by the operating environment. For Linux support, contact your sales representative or visit the NEC website at: http://www.nec.com/global/prod/express/linux/index.html VMware ESXi is supported only on Xeon processor systems.
  • Page 5 Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors. Noise emission was measured in accordance with ISO 7779, at 25°C. The actual value may vary by the operating environment. For Linux support, contact your sales representative or visit the NEC website at: http://www.nec.com/global/prod/express/linux/index.html VMware ESXi is supported only on Xeon processor systems.
  • Page 6: External Views

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i External Views Front View With Front bezel Hot Plug 2.5-inch Drive Configuration Hot Plug 3.5-inch Drive Configuration Non-hot Plug 3.5-inch Drive Configuration Legend Power Button USB 3.0 Connectors Dump (NMI) Button Drive Bay Cover...
  • Page 7: Rear Views

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Rear Views Hot Plug Power Supply Configuration Non-hot Plug Power Supply Configuration Legend Serial Port Connector Data LAN Connectors VGA Connector PCI Slots USB Connectors AC Inlet Management LAN Connector Power Supply Unit Revision 7.0 – June 2018...
  • Page 8: Dimensions (Mm)

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Dimensions (mm) Standard Bezel Non-redundant Power Configuration Redundant Power Configuration 175.0 469.3 367.0 498.4 249.0 Revision 7.0 – June 2018 NEC Corporation...
  • Page 9 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Dust Proof Bezel Non-redundant Power Configuration 492. 175. 367.0 506. 249. Redundant Power Configuration 492.0 175.0 492.0 367.0 518.2 249.0 Revision 7.0 – June 2018 NEC Corporation...
  • Page 10: Configuration Diagram

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Configuration Diagram Legend: Standard components Mandatory components Expansion Slots Legend PCIe 3.0 x2, x8 connector, Full Height, up to 173mm length PCIe 3.0 x1, x8 connector, Full Height, up to 173mm length PCIe 3.0 x16, x16 connector, Full Height, up to 312mm length PCIe 3.0 x4, x8 connector, Full Height, up to 173mm length...
  • Page 11: Server Configuration

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Server Configuration Base Models Product Name / Description Part Number NEC Express5800/T110i N8100-2707F no CPU, no RAM, no Drive Cage, no HDD, no Optiocal Drive, no Keyboard, no Mouse Including: 1x 500 Watt non-hot plug power supply...
  • Page 12 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Maximum Available Memory See the table below for the maximum memory size that you can actually use on your system. Maximum Memory Size Supported by Operating Systems Maximum Available Memory Microsoft Windows Server 2012 Standard...
  • Page 13: Internal Hard Disk Drives

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Internal Hard Disk Drives RAID Configuration Refer to the section in accordance with your disk form factor and RAID configuration 2.5-inch Drive 4.1.1 Operating System Supported RAID configuration Supported HDD/SSD RAID and Cache Section VMware ESXi 6.0...
  • Page 14 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Hot plug 3.5-inch Drive 4.1.2 Operating System Supported RAID configuration Supported HDD/SSD RAID and Cache Section VMware ESXi 6.0 Non-RAID (Embedded SATA) 4.2.11 4.3.5 RAID 0/1/10 No Cache 4.2.13 RAID 0/1/10 1GB Cache 4.2.15 RAID 5/6/50/60 1GB Cache 4.2.17...
  • Page 15 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Non-hot plug 3.5-inch Drive 4.1.3 Operating System Supported RAID configuration Supported HDD/SSD RAID and Cache Section VMware ESXi 6.0 Non-RAID (Embedded SATA) 4.2.21 4.3.7 RAID 0/1/10 No Cache 4.2.23 RAID 0/1/10 1GB Cache 4.2.25 RAID 5/6/50/60 1GB Cache 4.2.27...
  • Page 16 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i RAID 0/1/10 2GB Cache 4.2.35 VMware ESXi 6.0 RAID 0/1/10 No Cache 4.2.33 Not supported Red Hat Enterprise Linux 7 RAID 0/1/10 1GB Cache 4.2.34 NOTE:  A drive cage kit is required when no internal hard drive is installed.
  • Page 17: Required Components For Raid Configuration

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Required Components for RAID Configuration Embedded SATA Non-RAID Controller for 2.5-inch Drives 4.2.1 Category Product Name / Description Part Number Storage Controller Embedded SATA Controller (Standard) 4 x 6Gb/s SATA Cable Internal SATA Cable...
  • Page 18 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i RAID 0/1 Controller with 1 GB Cache for 2.5-inch Drives 4.2.5 Category Product Name / Description Part Number Storage Controller RAID Controller (1GB, RAID 0/1) N8103-176 Required Broadcom MegaRAID SAS 9362-8i RAID0/1/10, 1GB, Int. 8, PCIe 3.0(x8), SAS 12Gb/s, SATA 6Gb/s...
  • Page 19 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i  All drives within a RAID array should be of the same type, capacity and rotation speed.  Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SAS SSDs, SATA SSDs (ME), and SATA SSDs (VE) can be mixed in a system.
  • Page 20 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i 1 x Mini SAS HD to 1 x Mini SAS HD Internal SAS/SATA Cable K410-340(00) 1 x Mini SAS HD to 1 x Mini SAS HD, for 5th - 8th hard drives Drive Cage 2.5-inch Drive Cage...
  • Page 21 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i 4.2.15 RAID 0/1 Controller with 1 GB Cache for 3.5-inch Drives Category Product Name / Description Part Number Storage Controller RAID Controller (1GB, RAID 0/1) N8103-176 Required Broadcom MegaRAID SAS 9362-8i RAID0/1/10, 1GB, Int. 8, PCIe 3.0(x8), SAS 12Gb/s, SATA 6Gb/s...
  • Page 22 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Flash Backup Flash Backup Unit N8103-180 Recommended for Broadcom MegaRAID SAS 9362-8i 500mm Cable for Flash Backup Unit included Cable Internal SAS/SATA Cable (Attached in Cage) 1 x Mini SAS HD to 1 x Mini SAS HD Drive Cage 3.5-inch Drive Cage...
  • Page 23 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i 4.2.22 Embedded SATA RAID Controller for Non-hot plug 3.5-inch Drives Category Product Name / Description Part Number Storage Controller Embedded SATA Controller (Standard) 4 x 6Gb/s SATA, RAID0/1/10 capable Cable Internal SAS/SATA Cable (Attached in Cage)
  • Page 24 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i NOTE:  All hard drives within a RAID array should be of the same capacity. 4.2.26 RAID 5/6 Controller with 2 GB Cache for Non-hot plug 3.5-inch Drives Category Product Name / Description Part Number...
  • Page 25 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i 4.2.29 RAID 5/6 Controller with 2 GB Cache for Non-hot plug 3.5-inch Drives Category Product Name / Description Part Number Storage Controller RAID Controller (2GB, RAID 0/1/5/6, WT/WB) N8103-207 Required Avago(LSI) MegaRAID SAS 946N-8i RAID0/1/5/6/10/50/60, 2GB, Int.
  • Page 26: Supported Drives

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Cable Internal SAS/SATA Cable K410-365(00) 1 x Mini SAS HD to 2 x Single SATA, 1 set Installation Kit Dual M.2 SATA Mount Kit N8118-307 M.2 PCIe SSD adapter, 2 x M.2 socket Drive 120GB M.2 SATA SSD...
  • Page 27 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i 4 slots 1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector available (512n) 1TB 7.2K Hot Plug 2.5-inch SATA HDD N8150-489 1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector 2TB 7.2K Hot Plug 2.5-inch SATA HDD...
  • Page 28 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i SATA 400GB Hot Plug 2.5-inch SATA SSD N8150-780 1 x 400 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, ME (ME) 800GB Hot Plug 2.5-inch SATA SSD N8150-781 1 x 800 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, ME SATA 200GB Hot Plug 2.5-inch SATA SSD...
  • Page 29 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i 1 x 200 GB SATA SSD, 2.5-inch, 6b/s, 512n sector, VE SATA 400GB Hot Plug 2.5-inch SATA SSD N8150-783 (VE) 1 x 400 GB SATA SSD, 2.5-inch, 6b/s, 512n sector, VE 800GB Hot Plug 2.5-inch SATA SSD N8150-784 1 x 800 GB SATA SSD, 2.5-inch, 6b/s, 512n sector, VE...
  • Page 30 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Non-hot plug 3.5-inch Drives (1) 4.3.7 Category Product Name / Description Part Number Drive SATA 500GB 7.2K non-Hot Plug 3.5-inch SATA HDD N8150-526 4slots 1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm, 512n sector...
  • Page 31: Optical Drive

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Optical Drive Category Product Name / Description Part Number Internal Internal Slim DVD-ROM drive N8151-134 Slim DVD-ROM drive DVD read speed: 8x (DVD-ROM / DVD-R / DVD-RW) CD read speed: 24x (CD-ROM / CD-R/RW)
  • Page 32: Internal Rdx / Lto Drives

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Internal RDX / LTO Drives RDX/LTO Drive Selection Refer to the section in accordance with your type of tape drives:  RDX: Refer to 7.2.1  LTO: Refer to 7.2.2 NOTE:  Tape devices cannot be directly connected to VMware ESXi servers. For an ESXi environment, it is recommended to connect and configure an additional backup server via network.
  • Page 33: Pci Card

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i PCI Card Please refer to Supported PCI cards and Installable Slots with regard to the position of PCI slot which can mount PCI card supported. Network Interface Controller Category Product Name / Description Part Number...
  • Page 34: Sas Controller

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Category Network Interface Operating Systems N8104-157 Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Red Hat Enterprise Linux 7, VMware NOTE:  NIC Teaming feature is not supported on iSCSI interfaces. SAS Controller...
  • Page 35: Other Add-In Components

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Other Add-in Components Fan Kit Product Name / Description Part Number Non-redundant Fan Kit (Standard) Non-hot plug cooling fan for T110i Non-redundant Power Supply Fan N8181-178 Non-hot plug cooling fan for T110i NOTE: It can be installed only when the non-redundant power supply n8181-177 is installed.
  • Page 36 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i  Keyboard and mouse are not included in the base models. Please order separately if necessary. Revision 7.0 – June 2018 NEC Corporation...
  • Page 37: Add-On Components

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Add-on Components Server Management License 10.1 The server integrates the EXPRESSSCOPE Engine 3 as standard. Refer to Server Management for the standard management features. For more extensive remote KVM and remote media features, choose the following kit.
  • Page 38: References

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i References Boot Mode Setting The server supports Legacy mode and UEFI mode (default) as an OS Boot Mode. See the table below for the Boot Mode and X2APIC setting for each Operating System. As the default settings at the factory, UEFI mode is set as OS Boot mode and X2APIC is enabled.
  • Page 39: Server Management

    CLP (Command Line Protocol) (DMTF compliant)   Remote control via Web browser (multi user login at the same time)   Scheduling (without UPS, require NEC ESMPRO Manager)   BIOS setting by using XML file   Maintenance EXPRESSSCOPE®...
  • Page 40: Os Support Matrix For Pci Cards And Embedded Controllers

    SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i OS Support Matrix for PCI Cards and Embedded Controllers Part Number Product Name        Embedded SATA non-RAID Controller    - Embedded SATA RAID Controller       ...
  • Page 41 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i  The number between parentheses shows the population priority (recommendation). For example, install N8103-176 in the slot #4 and N8104-157 in the slot #3 when you have those cards.  There are PCI slot limitations depending on the processor and operating system. Please refer to the following and be careful to choose a processor and PCI cards.
  • Page 42 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i PCI slot limitations See the table below for the limitations on installing PCI cards (due to the number of interrupts that can be processed in the system) depending on the installed processor. Processor RAID controller...
  • Page 43 SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110i Secure Boot Mode This server supports Secure Boot. It is supported with UEFI Boot mode and protects the security by only allowing software programs with digital signature to run. The supported operating systems, software, and boot devices are below. The default setting of Secure Boot is disabled.
  • Page 44: Copyright Notice And Liability Disclaimer

    All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders. NEC shall not be liable for technical or editorial errors or omissions contained herein. For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less.
  • Page 45: Revision History

    12TB 7.2K non-Hot Plug 3.5-inch SATA HDD / N8150-601 ● RAID LED CABLE / K410-444(00) June 6, 2018 New products added: ● NEC Express5800/T110i / N8100-2707F ● Non-redundant Power Supply Fan / N8181-178 April 11, 2018 Discontinued product deleted: ●...

Table of Contents