Canon CX-G6400 User Manual page 169

(When you are connected
within a network environment)
Is communication with the
printer enabled?
(Adding a new port)
1. Select as described below:
For Windows 10
・
Right-click on start and then select Control Panel -> Hardware
and Sound -> Devices and printers.
For Windows 8.1
・
From the Desktop charms, select Settings -> Control Panel ->
Hardware and Sound -> Devices and Printers.
For Windows 7
・
Select the Start menu -> Devices and Printers.
2. Right-click the printer icon and select [Printer Properties].
The properties window will appear.
3. Click on the [Ports] tab and click [Add port].
4. Select [CNUS Network Port] and click [New Port...].
The [CNUS Network Port] dialog box will be displayed.
5. Click [Detect Printers].
This printer will appear in [List of Printers].
If this printer is not displayed, click [Limit detect area] and search
for the IP address.
6. Enter the new port name in the [Output].
7. Click [OK].
The port number and protocol that the printer uses for
communication are set as follows. Use these settings as references.
Port number
50000 TCP
50001 TCP/UDP
50002 UDP
For Troubleshooting Operations
Protocol
165