Table of Contents
Advertisement
3. Check the curl.
As shown in the figure, if the paper is placed with the printing surface facing up and the paper
is curled upward (Fig.1), fix the curl so that the paper is flat.
If the paper is curled downward (Fig.2), flatten the paper so that the curl does not exceed 2 mm.
Paper that is curled upward can cause paper jams or printing surface rubbing. If the paper is
curled, bend in the direction opposite to the curl in order to flatten it.
For plastic card
●
1. Flip through the two short sides (
Note
• When flipping through the card, do not touch the printing surface with your fingers.
• Flip through the two short sides of the card thoroughly. If you have difficulty flipping
through the card, do it in small amounts.
• Setting the card after flipping through it will prevent multiple cards from being fed at once.
(Fig.1)
printing surface
(Fig.2)
printing surface
) of the card to separate the cards.
Loading Paper
0 - 2 mm
17
Advertisement
Table of Contents
Troubleshooting
