Slow To Print; Settings Are Not Sent From Utility - Canon CX-G6400 User Manual

Chapter 6 Troubleshooting

Slow to Print

Check Point
Did you set the number
of prints in the application
software?
Check whether the paper feed
interval is set.
Check whether the Special
Settings is set.
Printing Does Not Stop/Data is Not Sent/Settings are Not Sent from Utility
Check Point
Check whether Print Queue
window (in which print data
order is registered) remains.
166
Solution
In such a case, specify the number of copies on the printer driver
side. Depending on the application software, it may take more
time than usual to print if you have set the number of prints in the
application software.
Open the [Advanced Settings] tab of the printer driver, and then
check whether the settings in [Paper feed interval].
Open the [Utility] tab of the printer driver, and then check whether
the settings in [Special Settings]. Printing may be slower than
normal depending on settings.
Solution
Stop the printer temporarily to cancel printing from the Status
Monitor, or delete the Print Queue window data. Next, reboot the
computer.
（→
P.95
（→ ）
P.86
）