Configuring Objects; General Information About Configuring Objects - ABB COM600 series User Manual

Modbus serial slave (opc)

Hide thumbs Also See for COM600 series:

Table of Contents

3.4.

3.4.1.

COM600 series, Version 5.1

Modbus Serial Slave (OPC) User's Manual

Only data objects that have been given a non-zero

information address in the Cross-References table are

connected to the Modbus Serial IED.

6. Click Save to create the cross-references (to connect the data objects to the Modbus

Serial IED).

Figure 3.3.5-1 The Cross-References window

For more information about the Cross-References function, see COM600 User's Manual.

Configuring objects

After the objects have been added, configure the object properties. Figure 3.4.1-1 shows

an example of how to use SAB600 to configure the object properties for Modbus Serial

Slave OPC Client.

To configure an object:

1. Select an object in the object tree of the communication structure.

The object properties appear now in the Object Properties window. The properties

and their values can be viewed as shown in Figure 3.4.1-1.

1MRS756913

SAB600_Modbus_Serial_Slave_Cross_References.png

Table of Contents