Configuring Data Objects - ABB COM600 3.4 User Manual

1MRS755382
3.4.5.
3.4.5.1.
Station Automation COM600 3.4
IEC 60870-5-101 Slave (OPC) User's Manual
Name
Device Connection Status
Event Queue Full
Multiple Updates Threshold Full
File Transfer
File Transfer Enabled
File Transfer Source Directory

Configuring Data objects

General about configuring data objects
You can configure data objects either in the Object Properties window or in the Cross
References window.
The actual configuration in Object Properties window by using the COM600 Station
Automation Builder 600 (SAB600) is performed as described in 3.2, Overview of con-
figuration.
The parameters are stored in Object properties in the COM600 Station Automation
Builder 600 (SAB600) (see the tables for each data object type).
Clicking Apply connects the data objects to the IEC101 Device. After clicking Apply
the connected data objects appears as child objects for the IEC101 Device. The cross
reference information can then be also modified by selecting the data object and using
the object properties window.
If you change the object names or structuring of objects of OPC Server, which are con-
nected to the IEC101 Device, re-open the cross reference tool and verify that the changes
Value/Value range
Default: Device Connection
Status
EventQueueOverflow
EventQueueSkipMultipleUp-
datesThreshold
Default: EventQueueOverflow
EventQueueOverflow
EventQueueSkipMultipleUp-
datesThreshold
Default: EventQueueSkipMul-
tipleUpdatesThreshold
True
False
Default: False
Description
Device Connection Status
Class definition used with cur-
rent device.
Defines current state of event
buffers.
Defines current state of skip-
ping multiple measurements
updates threshold.
States whether File Transfer
functionality is enabled or not.
Defines the source directory for
file transfer.
31