Operation - ABB COM600 3.4 User Manual

4.
4.1.
4.2.
4.3.
52
Station Automation COM600 3.4
IEC 60870-5-101 Slave (OPC) User's Manual

Operation

About this section
This section describes the basic operation procedures you can carry out after the object
properties for the IEC101 Slave OPC Client have been configured.
After this, you can, for example, monitor and control the condition of connections in
network. This is done by using the Online diagnostics function in SAB600.
Activating COM600 with new configurations
For information about activating COM600 with new configuration, see COM600 User's
Manual.
IEC101 Slave OPC Client diagnostics
To view version information on IEC101 Slave OPC Client or to monitor and control the
state of the client, right-click the IEC101 Slave OPC Client object and select Online
diagnostics, see Figure 4.3-1.
Figure 4.3-1 IEC101 Slave OPC Client Online diagnostics
In Online diagnostics box you can:
• reset IEC101 Slave OPC Client
• view the event log file, see Figure 4.3-2
• clear the event log file
1MRS755382
IEC101_Slave_OPC_Client_Online_diagnostics.jpg