Hitachi Compute Rack 220H Getting Started Manual page 33

Internal DVD-ROM drive
Figure 2-5: Internal DVD-ROM drive front panel
Table 2-5: Internal DVD-ROM drive front panel components
Location Name
1 Tray cover
2 Busy indicator
3 Eject button
4 Manual eject hole
* Turn off the power, wait for about 15 seconds, and then insert a thin stick into the hole. Push the position in contact with
the tip of the stick about 8 mm, and the tray opens slightly. Then draw the tray by hand and remove the disc.
Use a durable stick (diameter: 1.0 to 1.4 mm, length: 30 mm or more). An unbent clip is used usually.
1
State
-
Green-On
Green-Blink
-
-
The tray is opened or closed only when power is turned on. If ejection
of a disc with this button is prohibited by the command, the disc cannot
be ejected with the eject button.
Hitachi Compute Rack 220H Getting Started Guide
2 3 4
Open/close cover of the tray to place a disc.
During startup.
Accessing disc.
Open the tray.
This hole is used to forcibly eject the internal disc if it cannot
be removed due to a failure of the drive. *
Overview
Description
2-7