Hitachi Compute Rack 220H Getting Started Manual page 46

Figure 3-6: Mounting the system unit to the rack cabinet
3-6
When you slide in the system unit, you need to push the system
•
unit with a lot of force because the rail is tight.
Be careful to the surroundings and make sure you do not hit
anything.
Do not push down the system unit while sliding out the system
•
unit. If you do, the system unit may be deformed.
The inner rails are not locked by the buttons when making the
•
right and left of the outer rails reverse and having attached to
the rack cabinet. Remove and re-attach correctly the outer rails
to the rack cabinet. For remove procedures, see
system unit.
4
Lock latch
(White)
3
Installation
Hitachi Compute Rack 220H Getting Started Guide
2
Lock latch
(Blue)
3
Removing the
4