Table of Contents
Advertisement
3 Programming
3.1 Operating panel
The buttons on the operating panel are used to scroll around in the menu tree.
To activate a menu and to save a setting press Enter.
1
Display
2
Lid to USB connection
3
Arrows to scroll right, left, down and up
4
Enter
5
Enter/Exit the Main menu
3.2 Language settings
The EDS controller is pre-set from factory with English and Spanish languages. Other languages can be downloaded
from the ELS website directly to a USB stick (16 GB or smaller).
If changing from one of the pre-set languages, the language-enabled USB stick must be connected before powering
up the EDS controller.
Insert the language enabled USB stick. Power up the EDS controller, select language and press Enter to save.
3.3 Time and date settings
When the language has been set the "Date and time menu" appears automatically on the display.
Set the date and time and press Enter to save.
The date is set as YYYY-MM-DD.
The time is set as HH:MM.
3.4 Priming the pumps
Enter the MAIN MENU and activate the INSTALLER MENU.
MAIN MENU
EMERGENCY PUMP STOP
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS
INSTALLER MENU
VIEW EFFICIENCY
Installation manual
19
fig.8058
Hide quick links:
Advertisement
Table of Contents
