Calibrating The Pumps - Electrolux EDS Installation Manual

20
A password is needed to continue.
The default password is set to 01234.
When the password is set you will enter the INSTALLER MENU.
Activate the INSTALLER SERVICE menu.
INSTALLER MENU
INSTALLER SERVICE
INITIAL SYSTEM SETUP
PROGRAM FORMULAS
DATA TRANSFER
SET UNITS OF MEASURE
Activate the SERVICE PUMPS menu.
INSTALLER SERVICE
SERVICE PUMPS
VIEW LOAD COUNT
VIEW LOAD WEIGHT
VIEW AMOUNT PUMPED
CLEAR DATA LOG
Activate the PRIME PUMP menu.
SERVICE PUMPS
PRIME PUMP
PUMP CALIBRATION
NAME PUMPS
ENTER PRODUCT COSTS
DATE TUBE CHANGED
Select pump from the list to and press Enter to start and stop the pump.
The hose shall be filled all the way to the outlet of the hose.
SET PRIME PUMP
P1
P2
P3
P4
P5
P6

3.5 Calibrating the pumps

Make sure the pumps has been primed before calibrating.
Enter the MAIN MENU and activate the INSTALLER MENU.
MAIN MENU
EMERGENCY PUMP STOP
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS
INSTALLER MENU
VIEW EFFICIENCY
Installation manual