Basic Settings In The Eds Controller - Electrolux EDS Installation Manual

3.6 Basic settings in the EDS controller

In order for the EDS system to work the following basic settings must be made in the EDS controller.
Enter the MAIN MENU and activate the INSTALLER MENU.
MAIN MENU
EMERGENCY PUMP STOP
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS
INSTALLER MENU
VIEW EFFICIENCY
A password is needed to continue.
The default password is set to 01234.
When the password is set you will enter the INSTALLER MENU.
Activate the SET UNITS OF MEASURE menu and select unit.
INSTALLER MENU
INSTALLER SERVICE
INITIAL SYSTEM SETUP
PROGRAM FORMULAS
DATA TRANSFER
SET UNITS OF MEASURE
ELECTROLUX SETUP
Activate the ELECTROLUX SETUP menu.
INSTALLER MENU
INSTALLER SERVICE
INITIAL SYSTEM SETUP
PROGRAM FORMULAS
DATA TRANSFER
SET UNITS OF MEASURE
ELECTROLUX SETUP
In the ELECTROLUX SETUP menu the following sub menus are available.
Activate any of the menus to view or change the parameters.
• ELECTROLUX MACHINE
• ELECTROLUX ADDRESS
• MACHINE WEIGHT
• DUAL CONTROLLER
ELECTROLUX MACHINE
Activate the ELECTROLUX MACHINE menu and set the correct control system.
ELECTROLUX TYPE
COMPASS PRO
COMPASS
CLARUS CONTROL
Installation manual
23