NEC Express5800 Series User Manual page 22

Chapter 1 General Description
Management Utilities
• NEC ESMPRO
• ExpressUpdate
• Remote controlling feature (EXPRESSSCOPE Engine 3)
• RAID system management utility (Universal RAID Utility)
• Hard disk drive monitoring
• Power supply monitoring
Power saving and noiseless design
• Selection of power unit appropriate to environment, work load, and configuration
• Power consumption monitoring feature
• Power control feature
®
• 80 PLUS Platinum / Titanium certified high efficiency power supply *4
• Fan control appropriate to environment, work load, and configuration
• Silent sound design
• Enhanced Intel SpeedStep
• Cold redundant feature
Expandability
• PCI Express 3.0 (x8 lanes): 1 slot (Full height) *5, 6
• PCI Express 3.0 (x8 lanes): 1 slot (Low profile) *6
• PCI Express 3.0 (x8 lanes): 1 slot (dedicated to RAID controller)
• LOM card slot (x8 lanes): 1 slot (dedicated to LOM card)
• Large capacity memory of up to 256 GB *3
• Can upgrade to multi-processor system with up to two processors
• Expansion Bay (for hard disk drives): 8 slots
• Optical disk drive bay provided as standard
• USB3.0 interface (Front: 2 ports, rear: 2 ports, internal: 1 port)
• USB2.0 interface (internal: 2 ports)
• Management LAN port (1 port)
• With optional LOM card, two to four ports can be added.
Ready to use
• No cable connection is required to install a hard disk drive and additional power supply unit (hot swap
supported).
• Slide rails for each installation
Many built-in Features
• Redundant power supply system supported (valid when optional power supply unit is installed)
• El Torito Bootable CD-ROM (no emulation mode) format supported
• Software power-off
• Remote power-on feature
• AC-Link feature
• Remote console feature
• Power switch mask
• Connector for display unit provided on front panel
• Baseboard Management Controller (BMC) conforming to IPMI v2.0
22
®
Technology supported
Express5800/R120f-1E User's Guide
3. Features