NEC Express5800 Series User Manual page 38

Chapter 1 General Description
• LINK/ACT LED (
This LED indicates the status of the LAN port.
LINK/ACT LED pattern
On (green)
Flashing (green)
Off
• SPEED LED (
This LED indicates which network interface is used.
SPEED LED pattern
On (amber)
On (green)
Off
When N8100-154 1000BASE-T LOM card (4ch) is installed
SPEED LED pattern
On (amber)
On (green)
Off
When N8104-155 10GBASE-T LOM card (2ch) is installed
SPEED LED pattern
On (green)
On (amber)
Off
When N8104-156 10GBASE-SFP+ (2ch) + 1000BASE-T (2ch) LOM card is installed
– When operating with 10BASE-SFP+
SPEED LED pattern
On (green)
On (amber)
Off
– When operating with 1000BASE-T
SPEED LED pattern
On (amber)
On (green)
Off
38
1, 2, 3, 4, M)
The server is connected with network normally.
The server is accessing network.
The server is disconnected from network.
1, 2, 3, 4, M)
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX interface.
The port is operating with 10BASE-T interface.
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX interface.
The port is operating with 10BASE-T interface.
The port is operating with 10GBASE-T interface.
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX interface.
The port is operating with 10GBASE-SFP+ interface.
The port is operating with 1000BASE-T interface.
The port is operating with 10BASE-T interface.
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX interface.
The port is operating with 10BASE-T interface.
Express5800/R120f-1E User's Guide
4. Names and Functions of Parts
Description
Description
Description
Description
Description
Description