Chapter 2 Preparations
1.14.2 Notes on building RAID system
Note the following points when building a RAID system.
•
The number of hard disk drives required varies in each RAID level.
•
If the optional RAID controller N8103-176 is used, the RAID system cannot be built in
RAID5/RAID6/RAID50/RAID60.
RAID level
RAID 0
RAID 1
RAID 5
RAID 6
RAID 10
RAID 50
RAID 60
•
In the RAID system, all the hard disk drives in an array group must have the same capacity, interface type,
and rotational speed.
•
EXPRESSBUILDER helps you to install the OS to a RAID array easily.
•
If you want to install the OS manually, use RAID Configuration Utility at POST (Ctrl-R or H). For details,
see Chapter 2 (4. RAID System Configuration) in "Maintenance Guide" or the manual provided with the
optional RAID controller (N8103-176/177/178).
92
The minimum number of hard disk drives
N8103-176
1
2
4
Important
• Do not change the mode to hibernate while building a RAID system.
• Build a disk array in the RAID system using hard disk drives that have the
same specifications (capacity, rotational speed, and standard).
Express5800/R120f-1E User's Guide
1. Installing Internal Options
N8103-177/178
1
2
3
3
4
6
6