Handling And Operation; Setting The Time, Alarm Time And Alarm Type - Silvercrest SKR 800 A1 Operating Instructions Manual

Handling and operation

GB

Setting the time, alarm time and alarm type

Requirement: The device is in clock/standby mode.
NOTE
► Make the settings quickly. If you do not press a button for 7 seconds, the entry is
cancelled. All settings made up to this point are saved automatically.
♦ Press the
the indicator for 24-hour mode (
♦ Press the
mode (
NOTE
If the 12-hour mode is set, AM appears in the upper left of the display until 12
►
noon. From 12 noon, this changes to PM.
♦ Press the
the clock icon
♦ Press or hold down the
♦ Press the
♦ Press or hold down the
♦ Press the
the display and the icon for the activated alarm function
♦ Press or hold down the
♦ Press the
the display.
♦ Press or hold down the
♦ Press the
♦ Press the
♦ If you have selected the
♦ Use the
the radio alarm.
♦ Press the
together with the
10
button
2
button or
6
).
button to accept the setting. The hours will flash in the display and
appears.
button or the
button to accept the setting. The minutes will flash in the display.
button or the
button to accept the time. The hour digits for the alarm will flash in
button or the
button to accept the setting. The minute digits for the alarm flash on
button or the
button to accept the setting. The alarm type appears in the display:
(buzzer) or (radio).
or button to set the required alarm type.
appears on the display.
button or the
6
button
2
icons.
for about 2 seconds. The display
).
button to switch between 24-hour (
7
button to set the hour.
button to set the minutes.
button to set the hour.
button to set the minutes.
(radio) alarm type, press the
button to set the desired volume (
7
to accept the setting. The time reappears on the display
flashes, showing
5
) and 12-hour
appears.
button again.
) for
5
SKR 800 A1