♦
Insert 2 x 1.5 V batteries of the type AA/Mignon/LR6 (not included in the
product) into the battery compartment
polarity signs in the battery compartment
♦
Then close the battery compartment
it into place.
FM wire aerial
♦
Completely unwind the wire aerial
Handling and operation
Making basic settings
Requirement: The device is in clock/standby mode.
NOTE
►
If there is a suitably strong RDS signal (radio data system), the time and
date will be set automatically. Neither an adjustment of summer/winter time
is made automatically by the RDS nor does the station name appear on the
display
►
Make the settings quickly. If you do not press a button for 15 seconds,
the entry will be cancelled. All settings made up to this point are saved
automatically.
♦
Press the
format (
♦
Turn the −TIMER+ dial
(
NOTE
►
If the 12-hour format (
4
from 12:00 PM until 11:59 PM. From 12:00 PM to 11:59 AM, nothing
appears on the display
♦
Press the
♦
Turn the −TIMER+ dial
♦
Press the
♦
Turn the −TIMER+ dial
♦
Press the
on the display
♦
Turn the −TIMER+ dial
♦
Press the
on the display
♦
Turn the −TIMER+ dial
SKR 800 C3
4
.
0
button
for about 2 seconds. The symbol for the 24-hour
) flashes on the display
8
) and 12-hour format (
) is set, PM appears in the upper left of the display
4
0
button to accept the setting. The hour flashes on the display
8
0
button to accept the setting. The minutes flash on the display
8
0
button to accept the setting. The year date display flashes
4
.
8
0
button to accept the setting. The month date display flashes
4
.
8
d
. When doing so, note the
d
.
d
by replacing the cover and clicking
i
for FM radio reception.
4
.
to the right or left to switch between 24-hour
).
.
left or right to set the hours.
dial left or right to set the minutes.
left or right to set the year.
left or right to set the month.
4
4
GB │ IE │ NI
│
13
.
.
■