Automatic Switch-Off (Sleep Function); Switching The Display Dimmer On/Off; Switching The Led Light On/Off - Silvercrest SKR 800 C3 Operating Instructions And Safety Instructions

Cancelling the kitchen timer
♦ If only Timer 1 or Timer 2 is set, briefly press the
3
ton
Alternatively, you can press the −TIMER+ dial
♦ If Timer 1 and Timer 2 are set, briefly press the
button
press the −TIMER+
timer.
Automatic switch-off (SLEEP function)
You can use this function to automatically switch the device off after 10–120
minutes.
Briefly press the SNOOZE | SLEEP button
♦
120 (minutes) illuminates in the display
Press the SNOOZE | SLEEP button
♦
(120 - 10, OFF). The sleep function is activated after around 5 seconds if
no other button is pressed.
Press the SNOOZE | SLEEP button
♦
device switches off when the SLEEP function is activated.
To deactivate the SLEEP function, press the SNOOZE | SLEEP button
♦
until OFF is shown in the display
Switching the display dimmer on/off
♦ Press the DIMMER button
of the display
NOTE
► If the display dimmer is switched on, the display
15 seconds. The display
on every operation. When the display dimmer is switched off, the display
4
is lit permanently.
Switching the LED light on/off
♦ Briefly press the
the underside of the device.
♦ Briefly press the
off again.
NOTE
► If you do not switch off the LED light
120 minutes.
■ 18 │ GB │ IE │ NI
twice to cancel Timer 1 or Timer 2. The
3
twice each.
8
dial for around 2 seconds to cancel the selected
r
4
in stages.
4 on the device lights up for approx. 15 seconds
| ST/MO button
| ST/MO button
or
8
for around 2 seconds.
button
and will go out. Alternatively, you can
t
during operation.
4
.
t
several times to set the SLEEP time
t
to show the remaining time until the
4 or you switch the device off.
briefly to increase or decrease the brightness
4
q
to switch on the LED light
q
again to switch the LED light
a
, it will switch off automatically after
2
button or the but-
display goes out.
2
and the
t
goes off after around
a
on
a
SKR 800 C3