NEC Express5800 Series User Manual page 84

Chapter 2 Preparations

Adding a RAID controller (N8103-205/206/207/208/210/211)
Power
supply
0-3
RAID controller
miniSAS cable
HDD backplane interface cable
FBU cable
* N8103-209 cannot be installed to N8103-205/210/211.
(c) Using 2.5-inch HDD cage
Connect the cables as shown in the following figure. Install the hard disk drives in order from the left side.

Connecting one to four hard disk drives to the miniSAS connector on the motherboard
Power
supply
Motherboard
miniSAS cable
HDD backplane interface cable
You can use the controller on the motherboard to build a RAID system. For more information, see Chapter 2
(5. RAID System Configuration) in "Maintenance Guide".
84
MINISAS_1
BPB_CON1
BPB_CON
MINISAS_1
BPB_CON1
MINISAS_1
BPB_CON
Express5800/T110i User's Guide
1. Installing Internal Optional Devices
HDD cage
Flash Backup Unit
(N8103-209)
HDD cage