500ML Lighting Control Console
QuickStart Guide
Changing Fader Pages
Fader Pages may be changed at any time by pressing the [NEXT PAGE], or [LAST PAGE] buttons on the front panel
of the console or from within the Fader Page Directory window by selecting the page you would like to change to and
pressing the Goto Page button as indicated in
Figure
56.
Figure 56: Fader Page Directory - Goto Page Button
Template Page
Assignments on the Template Page will show on all other pages. This is especially helpful if you want to have the
same assignment on every page for some cuelists or group masters. Key or audience lighting is a good use case for
this function.
To be able to set your page to the template for setup purposes, please open up the Cuelist Directory window and select
Template Page from the list of pages and press the Goto Page button.
9. ArtNET and Shownet Output Setup
DMX Output Setup
To set up DMX output over Ethernet, open the Setup Menu by pressing the [SETUP] key, go to Show Settings tab and
select DMX Output from the Input / Output settings.
All DMX Output settings are stored inside the Showfile.
Figure 57: Setup Menu - DMX Output Setting
4 0
Programming