Table of Contents
Advertisement
8.1.3
Manual configuration
Preconditions:
■
The IP gateway is connected to the PC directly by a LAN cable.
The IP gateway is connected and ready for operation.
■
1. Link the external device in a common network to the IP gateway.
2. Launch the control panel.
3. Open the "Network and Sharing Center".
4. Open the "Local area connection" (1).
5. In the next window, select the "Properties" (2) button.
6. In the next window, select the list item "Internet Protocol version 4 (TCP/IPv4)" (3).
7. Click the "Properties" button (4).The "Properties" window for Internet protocol version 4
(TCP/IPv4) opens.
8. Select the option (5) to manually enter the IP address.
9. Assign an IP address (6) within the same range as the IP gateway.The default IP gateway
address is 192.168.1.111.
Note
The IP address of the PC cannot be identical to the IP address of the IP
gateway. Select, for example, 192.168.1.55.
10. Click the "Subnet Mask" (7) box.The current value is entered automatically and does not
need to be changed.
11. Click "OK" to confirm the entry.
Product manual 2TMD041600D0041
Commissioning
│18
Advertisement
Table of Contents
