ABB -Welcome Product Manual page 33

Refresh camera list
If there are cameras connected with camera interface and are associated with indoor station,
the camera list can be refreshed by press this button. Meanwhile, the camera list can be
synchronized in paired Welcome APP automatically.
If the cameras belong to indoor station, after set the indoor station address in "Basic settings ",
the associated camera lists will be got automatically by pressing "refresh camera list" in "
Device settings" . User can modify the camera names or delete a camera list optionally.
And this lists will be synchronized by APP too.
For example:
Precondition: A camera interface in Mode 4, 4 cameras, working associated with IS 001. IS 001
can surveil camera 01, camera 02, camera 03, camera 04.
Add a IP-Gateway together with IS 001, after register the APP, the camera lists(camera 01,
camera 02, camera 03, camera 04) will shown in the APP automatically, and user can sueveil
these cameras by APP.
No. Detail
ID
1
The ID is the sequential number of the device.
Modify
2 Click the "Modify" button to change your settings.
The current settings appear and can be modified.
Delete
3
Click the "Delete" button to remove a user from the list.
Device type
4
This is the device type description.
Device ID
5
The ID is the address of the outdoor station (If there is only one outdoor station, the ID as a rule
is 1).
Name
6
When using the Welcome app, the name is shown.
2nd-lock status
7
Show the availability of the 2nd-lock of the outdoor station
Product manual 2TMD041600D0041
Commissioning
│33