Table of Contents
Advertisement
8.2.8
Associated ComfortTouch
Associated ComfortTouch 2.x
The IP gateway can be used to control Busch-ComfortTouch
®
ComfortTouch
firmware must be version 2.4 or higher.
1. Create a user, e.g. ComfortTouch1.
2. Set the compatibility mode to "Yes".
3. Enter the IP address of the Busch-ComfortTouch
4. Create a configuration project in IPP 2.4 for the Busch-ComfortTouch
communication" application page.
5. Enter the IP address of the IP gateway in the "Outdoor station" tab in the "Outdoor station IP
address" menu box.
6. Enter the address of the outdoor station.
Note
If you want to remove a Busch-ComfortTouch
the Welcome system, simply set compatibility mode to "No". The address does
not have to be deleted.
Product manual 2TMD041600D0041
Commissioning
®
of the series 2.x. The Busch-
®
in the "ComfortTouch 2.x address" field.
®
, "Door
®
2.x that is already connected to
│36
Advertisement
Table of Contents
